canvas tent stove jack

How to Install a Stove Jack Flashing Kit on a Canvas Tent: A Step-by-Step Guide from Elkmountaintents.

Elkmountaintents is a company that specializes in manufacturing canvas tents and outdoor gear for camping enthusiasts. One of the most popular products they offer is a stove jack flashing kit, which allows campers to safely use a wood stove inside their canvas tent. In this article, we will provide a step-by-step guide on how to install a stove jack flashing kit on a canvas tent.

What is a Stove Jack Flashing Kit?

A stove jack flashing kit is a specialized accessory that is used to safely and efficiently install a wood stove inside a canvas tent stove jack. It is designed to create a hole in the roof of the tent where the stove pipe can pass through. The flashing kit ensures that the stove pipe is properly insulated and that there are no gaps that can allow hot gasses or sparks to escape, which can be a serious safety hazard.

Materials Needed

Before starting the installation process, it’s important to ensure that you have all the necessary materials. Here’s a list of what you’ll need:

  • Stove jack flashing kit
  • Canvas tent
  • Scissors
  • Marker
  • Drill
  • Hole saw attachment
  • Measuring tape
  • Screwdriver
  • Screws
  • Heat-resistant sealant
  • Stove pipe

Installation Process

Step 1: Choose the Location

The first step in installing a stove jack flashing kit is to choose the location where you want the wood stove to be located inside your canvas tent. This is an important decision, as you want to make sure that the stove is positioned in a safe and convenient location. It’s best to choose a location that is away from the walls and any other flammable materials.

Step 2: Mark the Spot

Once you’ve chosen the location for the stove, you’ll need to mark the spot where you want to install the stove jack. Use a marker to draw a circle around the area where you want the stove jack to be installed. The circle should be slightly larger than the diameter of the stove pipe.

Step 3: Cut the Hole

Now it’s time to cut the hole in the roof of the tent. Use a drill with a hole saw attachment to carefully cut along the marked circle. Be sure to wear eye protection and work slowly to avoid damaging the canvas.

Step 4: Install the Stove Jack

Once the hole has been cut, it’s time to install the stove jack. Place the stove jack over the hole so that the canvas is sandwiched between the two layers of the stove jack. Make sure that the stove jack is centered over the hole.

Step 5: Screw in Place

Using a screwdriver, secure the stove jack to the canvas tent by screwing it in place. Be sure to use screws that are long enough to go through both layers of the stove jack and the canvas tent.

Step 6: Apply Sealant

Apply a heat-resistant sealant around the edge of the stove jack to create an airtight seal. This will prevent any hot gasses or sparks from escaping through the gap between the stove jack and the canvas tent.

Step 7: Install the Stove Pipe

Finally, it’s time to install the stove pipe. Insert one end of the stove pipe into the stove jack and secure it in place using the provided screws. The other end of the stove pipe should be connected to the wood stove. Make sure that the stove pipe is properly insulated and that there are no gaps that can allow hot gasses or sparks to escape.

canvas tent stove jack.

FAQs

Q: What size stove jack do I need for my canvas tent?

A: The size of the stove jack you need will depend on the size of your stove pipe. Make sure to measure the diameter of your stove pipe before purchasing a stove jack flashing kit.

Q: Can I install a stove jack flashing kit myself ?

A: Yes, you can install a stove jack flashing kit yourself by following the step-by-step instructions provided above. However, if you are not confident in your ability to install the kit, it’s best to hire a professional to do it for you.

Q: Can I use any wood stove with a stove jack flashing kit?

A: It’s important to make sure that the wood stove you plan to use is compatible with a stove jack flashing kit. Check the manufacturer’s specifications to make sure that the stove is designed to be used with a stove jack.

Q: Do I need any special tools to install a stove jack flashing kit?

A: The installation process requires a few basic tools, including a drill, a hole saw attachment, a screwdriver, and scissors. You may also need a measuring tape and a marker.

Q: How do I clean and maintain the stove jack flashing kit?

A: To clean the stove jack flashing kit, use a soft-bristled brush to remove any debris or soot. You can also wipe it down with a damp cloth if necessary. Make sure to check the kit regularly for any signs of wear or damage, and replace any worn or damaged components as needed.

Conclusion

Installing a stove jack flashing kit on a canvas tent is a great way to safely and efficiently use a wood stove inside your tent. By following the step-by-step instructions provided above, you can install a stove jack flashing kit yourself and enjoy the warmth and comfort of a wood stove during your camping trips. Just make sure to choose a safe and convenient location for the stove, and to properly insulate and seal the stove pipe to prevent any safety hazards.